Tenda TEG1016G User Manual

Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names mentioned
herein are the trademarks or registered trademarks of their respective
holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Shenzhen Tenda Technology Co.,
Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd,
any individual or party is not allowed to copy, plagiarize, imitate or
translate it into other languages.
All the photos and product specifications mentioned in this guide are for
references only. As the upgrade of software and hardware, there will be
changes. And if there are changes, Tenda is not responsible for
informing in advance. If you want to know more about our product
information, please visit our website at www.tenda.cn.

Tenda TEG1016G Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Size (imperial)	19 \
Dimensions (WxDxH)	208 x 440 x 44 mm
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity technology	Wired
Switch type	Unmanaged
Switch layer	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
SFP/SFP+ slots quantity	0
Gigabit Ethernet (copper) ports quantity	16
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Form factor	1U
Certification	CE, RoHS
Product color	Blue
LED indicators	Link, Power
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Output power	20 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	440 mm
Width	208 mm
Height	44 mm

Summary

Copyright Statement

Introduction

Switch Features

Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3x standards.

Package Contents

Lists items included in the product package for user reference.

Front Panel and Rear Panel Specifications

Details the physical ports and indicators on the front and rear panels of the switch.

LED Indicator Specifications

Explains the meaning and status of the Power, Link/ACT, and 1000Mbps LED indicators.

Installation

Installation Instructions

Provides essential guidelines for safe and proper installation of the switch.

Desktop Installation

Details the process of placing the switch on a desktop using included foot pads.

Rack Installation

Explains how to mount the switch into a standard 19-inch rack using mounting ears.

Application Example

Illustrates a typical network setup connecting the switch to PCs and a server for internet access.

Product Specification

Features

Details the technical features and standards compliance of the switch.

Performance

Outlines the performance metrics like MAC address table, packet filtering, and backplane bandwidth.

Physical and Environmental

Specifies operating conditions, input range, power consumption, and dissipation method.