Tenda TEG1016G - Package Contents

 Supports IEEE802.3x flow control for full-duplex, and
backpressure flow control for half-duplex.

Provides 16/24 Gigabit self-adaptive RJ-45 ports, supports 802.3
NWay Auto-negotiation.
 Each RJ-45 port supports Auto-MDI/MDIX function.
 Supports MAC address auto-learning and aging function.
 Adopts store- and- forward switching method.
 Supports up to 32Gbps/48Gbps backplane bandwidth.
 Transmission rate of each port reaches up to 1488095pps.
 Supports 8K MAC address table
 Equipped with high performance power supply.
1.2 Package Contents
Please check the items carefully after you open the packing as below:
(The listed items are for reference only)
 One Gigabit Ethernet Switch
 One power cord
 One User Guide
 One Set of L-shaped Bracket
（
two mounting ears, matched
screws
）
 Four foot pads
3