Need help?Do you have a question about the Tenda W15E and is the answer not in the manual?
General| WAN Port | 1 x 10/100 Mbps |
|---|---|
| Security | WPA/WPA2, WPA-PSK/WPA2-PSK |
| Standards | IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u |
| Antenna | 4 x 5dBi external antennas |
| Flash | 8MB |
| SDRAM | 64MB |
| DHCP Server | Yes |
| VPN Passthrough | PPTP, L2TP, IPsec |
| Firewall | SPI firewall |
| Wireless Standard | IEEE 802.11ac |
| Frequency Bands | 2.4GHz |
| Maximum Wireless Speed | 300 Mbps |
| Interface | 4 x 10/100Mbps LAN |
| Button | 1 x Reset button |
| WAN Connection Type | PPPoE, Dynamic IP, Static IP |
Step-by-step guide on physically placing and setting up the router.
Instructions for connecting the router to network devices and power.
Guide on how to access the router's web-based management interface.
Configuration steps for PPPoE internet connection type.
Configuration steps for Static IP internet connection type.
Guide to cloning MAC address for the WAN port.
Configure LAN IP, DHCP server, and MAC/IP binding.
Configuration steps for Dynamic IP internet connection type.
Sets basic wireless parameters like SSID and password.
Steps to change SSID, security, and WiFi password.
Sets advanced wireless parameters like channel and transmit power.
Steps to modify guest network settings like SSID and security.
Extends wireless coverage by repeating the signal.
Controls which clients can connect based on MAC addresses.
Sets up a separate network for guests.
Filters clients based on MAC addresses for internet access control.
Filters IP addresses to control internet access.
Manually sets bandwidth control rules.
Steps to enable automatic bandwidth management.
Connects the router to a VPN server as a client.
Operates the router as a VPN server for specified clients.
Enables secure VPN transmission using an IPSec tunnel.
Step-by-step guide for PPTP/L2TP VPN setup.
Step-by-step guide for IPSec VPN setup.
Allows only listed IP/MAC to access the internet.
Steps to manually add an IP-MAC binding rule.
Sets defense functions like ARP, DDoS, and IP attack defense.
Sets basic captive portal parameters.
Steps to enable and configure the captive portal.
Manages clients and authentication-free hosts for web authentication.
Steps to configure captive portal authentication.
Sets basic PPPoE authentication parameters.
Steps to enable PPPoE authentication.
Manages PPPoE accounts (username/password).
Steps to add a PPPoE user account.
Steps to configure PPPoE authentication.
Enables WiFi access via WeChat authentication.
Steps to enable and configure WiFi via WeChat.
Steps to configure WiFi via WeChat for a restaurant.
Enables internet users to access intranet resources.
Steps to add a port forwarding rule.
Enables unlimited internet communication for a LAN computer.
Maps dynamic WAN IP to a static domain name.
Steps to enable DMZ host for a computer.
Allows modification of the router's login password.
Steps to change the router's login password.
Backs up and restores router configuration.
Steps to restore router configuration from a backup file.
Steps to upgrade firmware from a local file.
Steps to enable and configure remote web management.
Restarts the router when it's not working properly.
Upgrades router firmware for better performance.
Steps to upgrade firmware directly from the internet.
Allows remote management of the router via the internet.
Steps to back up the current router configuration.
Resets the router to its original factory settings.
To Next Page
