Tenda W15E - 2 Installing the Router; 2.2 Installing the Router; 2.3 Connecting the Router

5
2.2 Installing the Router
Step 1 Place the router upside down on the workbench, and paste the four pad stickers into the round recesses
in the coroner of the device.
Step 2 Place the router right side up on the workbench, and adjust the position of the antennas. See the
following figure.
2.3 Connecting the Router
Step 1 Connect the Ethernet cable to the WAN port.
Step 2 Connect the router to other network devices (such as servers and computers) using the Ethernet cable.
Check whether the connection is proper. Connect the router with the receptacle using the power