98
9.4.3 Configuration procedure
Step1: Set Router 1 to function as the server.
Step 1 To access the page, choose VPN > PPTP/L2TP Server.
Step 2 Enable VPN Server.
1. VPN Server: Click Enable.
2. Server Type: Click PPTP.
3. WAN: Select the WAN port used by router 1 for the VPN server, which is WAN1 in this example.
4. Encryption: Click Enable.
5. Click OK.
6. Add PPTP user allowed to connect.
(1) Click +Add.
To Next Page
Loading...
