159
15.4.2 Steps for Local Upgrade
Before an upgrade, check if the firmware is correct. Incorrect upgrade will damage the router.
Do not power off the router during an upgrade. Otherwise, the router may be damaged.
After the firmware is upgraded, you are recommended to restore the factory settings of the router and configure
the router again, so as to ensure stability of the router and proper operation of new functions.
Step 1 Login to the official website of Tenda at http://www.tendacn.com, download the latest firmware to your
computer.
Step 2 Choose Maintenance > Firmware Upgrade.
Step 3 Upgrade Type: Select Local Upgrade.
Step 4 Click Browse…, and select the downloaded firmware.
Step 5 Click Upgrade.
---End
Wait until the progress bar is complete.
You will be redirected to the login page after the progress is complete. Login to the web UI of the router, restore
the router to the factory settings, and re-login.
15.4.3 Steps for Online Upgrade
The connected router automatically detects if there is any firmware available for upgrade. Choose Maintenance >
Firmware Upgrade. indicates that the router has detected new firmware for upgrade.
Step 1 Choose Maintenance > Firmware Upgrade.
Step 2 Click Download and Upgrade.
To Next Page
Loading...
Need help?
General
