Tenda W15E - Example of Web Authentication; Networking Requirement; Solution; Configuration Procedure

120
---End
11.3 Example of Web Authentication
11.3.1 Networking requirement
A company uses W15E to deploy a network. The company requires that employees accessing the internet or
intranet need to be authenticated, and they should be redirected to www.baidu.com after being authenticated.
However, the network administrators are free from authentication.
11.3.2 Solution
The Captive Portal function is recommended to address this requirement. Assume that the MAC address of the
network administrator’s computer is CC:3A:61:71:1B:6E.
11.3.3 Configuration procedure
Step 1 Set the Basic Settings of captive portal.
1. Choose Captive Portal > Basic Settings.
2. Select the Enable check box of Captive Portal.
3. Session Timeout Interval: Enter the expiration time.
4. Logo: Click Change Image to upload the logo image of the company.
5. Title: Enter the title displayed on the authentication page, such as Welcome to Tenda.
6. Background Image: Click Change Image to upload the background image displayed on the
authentication page, such as the company’s advertising photo.
7. Disclaimer: Enter the company’s disclaimer.
8. Redirected To: Select Specified Page, and enter the website address where the clients are redirected to
after authentication completes, which is www.baidu.com in this example.
9. Click OK.