164
Configuration procedure
Step 1 Choose Maintenance > Remote WEB Management.
Step 2 Click Enable.
Step 3 Select WAN port as required, which is WAN1 in this example.
Step 4 Click OK.
---End
Verification
The network administrator can login to the web UI of the router to manage by entering
http://202.105.106.55:8088 in browser of the remote computer which is connected to the internet and has
obtained an IP address.
15.8 Diagnostics
15.8.1 Overview
This module enables you to check the internet communication status. To access the page, choose Maintenance >
Diagnostics.