Tenda W15E - 10.1.2 Adding an IP-MAC Binding Rule

109
Parameter description
Parameter
Description
IP-MAC Binding
It specifies whether to enable the IP-MAC Binding. By default, it is disabled.
Binding List
It is used to manually add the IP address and the corresponding MAC address.
It is used to delete the selected rule.
IP Address
It displays the added IP address.
MAC Address
It displays the MAC address corresponding to the IP address in a rule.
Remark
It displays the remark information (if any).
Operation
It is used to edit or delete the selected rules.
Dynamic
Binding
It displays the information of clients connected to the router. This button is used
to add the selected rule to the Binding List.
This button is used to add all the rule to the Binding List.
IP Address
It displays the IP address of the client connected to the router.
MAC Address
It displays the MAC address corresponding to IP address of the client connected
to the router.
Operation
You can add the rule to the Binding List simply by clicking the corresponding
Bind.
10.1.2 Adding an IP-MAC Binding Rule
Step 1 To access the page, choose Security > IP-MAC Binding.