Tenda W15E - 9.3 IPSec

93
Parameter
Description
PPTP/L2TP
User
Network Users
It specifies whether the client is a network or a host. When
PPTP/L2TP is a network, you need to configure the PPTP/L2TP LAN
network segment and subnet mask.
Network Segment
It is configurable when the PPTP/L2TP is a network. It indicates the
LAN IP of the PPTP/L2TP client, such as 192.168.1.0.
Subnet Mask
It is configurable when the PPTP/L2TP is a network. It indicates the
LAN subnet mask of the PPTP/L2TP client.
Remark
It is used to briefly describe the rule, which is optional.
Operation
The following operations can be preformed on the rules:

: It is used to edit the rule.

: It is used to delete the rule.
9.3 IPSec
IP Security (IPSec) is a set of services and protocols for helping protect the security of point-to-point
communication and defend against network attack. IPSec VPN tunnel is created for secure communication.
To access the page, choose VPN > IPSec.
The following figure shows the dialog box that appears after clicking +Add.