Tenda W15E - Page 103

92
Parameter description
Parameter
Description
PPTP/L2TP
Server
VPN Server
It specifies whether to enable the PPTP/L2TP server function. After
the function is enabled, the router functions as a VPN server.
Server Type
It specifies whether the router functions as a PPTP server or L2TP
server.
WAN
It specifies the WAN port of the router for PPTP/L2TP server. On the
web UI of the router functioning as the VPN client to be connected to
the server, set the Server IP address/Domain Name as the IP
address of the WAN port.
Encryption
It specifies whether to enable the data encryption. Apply the same
settings to both the client and server. It is only applicable to PPTP.
IP Address Pool
It specifies the range of IP addresses that the server assigns to
PPTP/L2TP clients.
Max. Number of
Connections
It specifies the maximum number of clients that can connect to the
PPTP/L2TP server. By default, it is 32 and cannot be changed.
PPTP/L2TP
User
It is used to add the VPN username and password.
It is used to delete the selected rule.
Username/Password
It specifies the username and password for connecting PPTP/L2TP
clients to the PPTP/L2TP server.