Tenda W15E User Manual

68
Parameter description
Parameter
Description
Port Filter
It specifies whether to enable the port filter function. It is disabled by default.
It is used to add the port filter rule.
It is used to delete the selected rule.
IP Group
It specifies the IP Group to which the rule is applied.
Time Group
It specifies the time when the rules take effect, that is the specified time when the specified
devices in the IP group cannot access the internet.
Port
It specifies the inaccessible service port.
Protocol Type
It specifies the protocol of the inaccessible service. It is recommended to retain the default
settings.
Status
It specifies the current status of the rule, including Enabled and Disabled.
Operation
The following operations can be preformed on the rules:

: It is used to disable the rule.

: It is used to enable the rule.

It is used to edit the rule.

: It is used to delete the rule.
7.4.2 Adding the Port Filter Rule
Step 1 To access the page, choose Filter Management > Port Filter.
Step 2 Enable the Port Filter, and click OK.
Step 3 Click +Add.

Tenda W15E Specifications

General

Brand	Tenda
Model	W15E
Category	Network Router
Language	English