107
is 202.105.106.55 in this example.
(5) Local LAN/Mask: Enter the local LAN network segment/subnet mask, which is 192.168.1.0/24.
(6) Remote LAN/Mask: Enter the remote LAN network segment/subnet mask, which is 192.168.0.0/24.
(7) Pre-shared Key: Enter the pre-shared key, which is 12345678 in this example.
(8) Click OK.
---End
The entry shown in the following figure appears.
9.5.4 Verification
Log in to the web UI of the router. Choose System Status > Live Users. Setup succeeds if the IPSec SA shows
connection numbers.
To Next Page
Loading...
