60
---End
7.2.3 Example of IP Filter
Networking requirement
A company uses W15E to deploy a network. According to the company’s regulation, employees are disallowed to
access the internet from 8:00 ~ 18:00. The LAN IP range is 192.168.0.2 ~ 192.168.0.250.
Solution
The IP filter function is recommended to address this problem.
Configuration procedure
Step 1 Set the Time Group (8:00 ~ 18:00). See 7.1.2 Adding the Time Group for detailed configuration steps.
Step 2 Set the IP Group (IP range: 192.168.0.2 ~ 192.168.0.250). See 7.1.3 Adding the IP Group for detailed
configuration steps.
Step 3 Add the IP Filter rule
1. To access the page, choose Filter Management > IP Filter. Select the check box of IP Filter, and click OK.
To Next Page
Loading...
Need help?
General
