128
It is used to add PPPoE accounts.
It is used to delete the selected PPPoE-authenticated user.
It specifies the user name used for PPPoE authentication.
It specifies the flow control policy of the corresponding user.
It displays the description of the corresponding account (if any).
It specifies the expiration time of the corresponding user.
It specifies the current status of the user, including Enabled and Disabled.
The following operations can be preformed on the rules:
: It is used to disable the rule.
: It is used to enable the rule.
: It is used to edit the rule.
: It is used to delete the rule.
It is used to export .cfg configuration documents. You are recommended to export the
data after adding the account. Therefore, you can restore the data by directly
importing the documents without re-addition if the user data is lost.
It is used to display the previously exported configuration documents.
It is used to import the selected user data.
12.2.2 Adding a PPPoE Account
Step 1 To access the page, choose PPPoE Authentication > User Management.
Step 2 Click +Add.
Step 3 Enter the username and password and other parameters in the dialog box that appears.
Step 4 Click OK.
To Next Page
Loading...
Need help?
General
