50
6.7 Access Control
6.7.1 Overview
The access control function disallows the specified clients to connect to the WiFi. Clients, such as notebooks, pads,
and smart phones have MAC addresses. The access control function of the router enables you to implement
access control based on MAC addresses of wireless clients.
To use the function, choose Wireless > Access Control. For limitation on connection time or connection of wired
clients, see 7.3 MAC Filter. By default, the access control function is disabled.
Enable the Access Control, see the following figure:
Parameter description
It specifies whether to enable the access control function. It is disabled by default.
To Next Page
Loading...
