49
Step 6 Click OK in the dialog box that appears.
---End
Verification
It takes effect after rebooting the router. Access the Wireless Repeater page again, repeating succeeds when the
connection status is Connected. Clients connected to SSID of Router 2 can access the internet. You can access the
Wireless > Basic page to see the SSID.
If you cannot log in to the web UI using the original IP address after rebooting the router, do the following:
Use www.tendawifi.com to log in.
Use the IP address of the router (Router 2 in this example) assigned by the upstream router (Router 1 in
this example) to log in. You can log in to the web UI of Router 1 to see the IP address.
To Next Page
Loading...
