Tenda W15E - 14.4.2 Adding a DDNS rule

150
The following figure shows the dialog box that appears after clicking +Add.
Parameter description
Parameter
Description
DDNS
It specifies whether to enable the DDNS function. By default, it is disabled.
DDNS Provider
It specifies the DDNS service provider. The router supports oray.com, gnway.com, Dyads,
and No-IP.
Server Type
It specifies the type of the current DDNS account, which is only applicable to oray.com.
Username
It specifies the DDNS login username registered on the DDNS provider website.
Password
It specifies the DDNS login password registered on the DDNS provider website.
Domain Name
It specifies the domain name obtained from the DDNS server. You must manually enter the
domain name registered on the providers’ website except oray.com.
Connection
Status
It specifies the connection status of the DDNS service.
14.4.2 Adding a DDNS rule
Step 1 Choose Virtual Server > DDNS.
Step 2 Select a DDNS provider from the drop-down list box of the DDNS Provider, and click Register.