Tenda W15E - Add a Web Filter Rule

73
Parameter description
Parameter
Description
Web Filter
It specifies whether to enable the web filter function. It is disabled by default.
It is used to add a web filter rule.
It is used to delete the selected rule.
IP Group
It specifies the IP Group to which the rule is applied.
Time Group
It specifies the time when the rules take effect, that is the specified time when the specified
devices in the IP group cannot access the websites.
Category
It specifies the website category inaccessible to the clients.
Status
It specifies the current status of the rule, including Enabled and Disabled.
Operation
The following operations can be preformed on the rules:

: It is used to disable the rule.

: It is used to enable the rule.

It is used to edit the rule.

: It is used to delete the rule.
Website
Management
: It is used to view or add web category to be managed.
7.5.2 Add a Web Filter Rule
Step 1 To access the page, choose Filter Management > Web Filter.
Step 2 Select the check box of the Web Filter, and click OK.