Tenda W15E - DHCP Server

20
LAN IP
LAN IP is the management IP address of the router, which can be modified if necessary.
Parameter description
Parameter
Description
LAN IP
It specifies the IP address of this router’s LAN port, namely the IP address for logging in to the
web UI of the router.
You can log in to the web UI of the router through either IP address (default 192.168.0.1) or
the domain name (tendawifi.com).
Subnet Mask
It specifies the subnet mask of the IP address of the router.
DHCP Server
If the DHCP Server is enabled, the DHCP server can automatically assign IP address, subnet mask, gateway, DNS,
and so on to the clients connected to the router. If this function is disabled, you have to manually configure the IP
address of your client to access the internet. You are recommended to retain the DHCP Server enabled.
Parameter description
Parameter
Description
DHCP Server
It specifies whether to enable the DHCP Server. This function is enabled by default.
Start IP
It specifies the start IP address of the IP address pool of the DHCP server. The default
value is 192.168.0.100.
End IP
It specifies the end IP address of the IP address pool of the DHCP server. The default
value is 192.168.0.200.The start and end IP addresses must belong to the same
network segment as the IP address of the LAN port of the router.
Lease Time
It specifies the validity period of an IP address assigned by the DHCP server to a client.