Tenda FH456 - To Set up a WISP Bridge

Specify Additional Settings
43
To set up a WISP bridge
Configure Router B:
Generally, you don’t need configure the Router A.
 Check and make a note of the WiFi name and password of the Router A to which this Router
(Router B) will connect.
(Parameters here are for an example)
❷ Log in to the Router’s User Interface, and click Wireless Repeating. Click the WISP button to
enable the WISP feature.
WiFi Name (SSID):
Tenda_666666-ZL
WiFi Password: zl666666
1