Tenda 5G03 User Manual

Tips
If the LED indicator does not light up, refer to Q1 in FAQ.
❸
Use the included power adapter to connect the power jack of
the router to a power source.
❹
Press the button on the router to turn it on.
All LED indicators light up and then off immediately. Wait a
moment and then the , and indicators light up in
sequence when the router is connected to the internet
properly.
- 3 -
MESH
1
2
LAN1 WAN/LAN2 PWR

Tenda 5G03 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Device type	Cellular network router
Product color	Black
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
WLAN data transfer rates supported	574, 1200 Mbit/s
4G standard	LTE-TDD & LTE-FDD
3G standards	WCDMA
Data network	3G, 4G, 5G
SIM card type	NanoSIM
3G bands supported	850, 900, 2100 MHz
Ethernet LAN (RJ-45) ports	1
Processor frequency	2 GHz
Antenna type	Internal
Antennas quantity	10
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	RoHS
Cables included	LAN (RJ-45)