Document Version: V1.3
147
Step 2 Configure the NVR.
1. Log in to the GUI of the NVR.
2. When the channel is abnormal, you can set the linkage action.
(1) Navigate to Configuration > Alarm > Exception Detection.
(2) Set Exception Type, which is Channel error in this example.
(3) Select the channels for exception detection, which are D1 to D4 in this example.
(4) Set Linkage Action, which is Send Email in this example.
(5) Click Save at the bottom of the page.
3. Configure the email alarm function.
(1) Navigate to Configuration > Network > Email.
(2)
Enable the Email Alarm Service function.
(3)
Enter the SMTP server address, which is smpt.gmail.com in this example. Enter the
SMTP server port, which is 465 in this example.
(4)
Set the name of the sender, which is Tom in this example. Enter the email address of
the sender, which is Tom@gmail.com in this example.
(5)
Enter the login password of the Gmail of the sender. Click the icon behind the
input box to display the entered password.
(6)
Enable the Image Attachment function.
(7) Set the name of the recipient, which is Jerry in this example. Enter the email address
of the recipient, which is Jerry@gmail.com in this example.
(8) Click Test.
If the test fails, try the following steps:
1. Recheck the parameters you set in the NVR.
2. Log in to your Gmail, click Accounts and Import on the settings page, find Change
account settings, and click Other Google Account settings.
3. Click Security, find less secure app access, and enable the Turn on access function.
To Next Page
Loading...
