Document Version: V1.3
29
If the user name and password of the camera to be added are different from those of the
NVR, add the camera by Method 2.
Method 2:
1.
Locate the camera you want to add according to the S/N, and click behind the
camera.
2. Select the protocol of the camera, enter the port, username and password, and click
Add.
3. If you want to add other cameras, repeat substep 1 and substep 2.
---End
Wait a moment. The camera is added successfully. You can check the added camera in the Added
Camera module.
To Next Page
Loading...
