Tenda MX21 Pro - Quick Setup; Connect Your Primary Node to the Internet

Document version: V1.0
139
3.3 Quick setup
3.3.1 Connect your primary node to the internet
Before you start, download and install the Tenda WiFi App on your mobile device (smartphone or
tablet). A smartphone is used for illustration here.
Configuration procedure:
Step 1
Connect your primary node.
Step 2
Connect your smartphone to the Wi-Fi network of the primary node.
The default Wi-Fi name and password can be found on the bottom label of the device.
Step 3
Run the Tenda WiFi App.
Step 4
Tap Start Now.