Tenda MX21 Pro - Wi-Fi Settings; Basic Settings

Document version: V1.0
38
2.5 Wi-Fi settings
This section introduces basic Wi-Fi settings, including changing the Wi-Fi name, password and
encryption mode, and separating the 2.4 GHz and 5 GHz networking.
This section includes the following parts:
−
Basic settings
−
Separate the 2.4 GHz and 5 GHz Wi-Fi networks
−
Unify the 2.4 GHz and 5 GHz Wi-Fi networks
2.5.1 Basic settings
To access the Wi-Fi settings page, log in to the web UI, and choose WiFi Settings.
On this page, you can configure basic WiFi parameters, such as the WiFi name and password.
The following table describes the parameters displayed on this page.
Parameter description
Parameter
Description
Unify 2.4 GHz & 5
GHz
Used to enable or disable the Unify 2.4 GHz & 5 GHz function.
When this function is enabled, the 2.4 GHz and 5 GHz Wi-Fi networks share the same
SSID and password. WiFi-enabled clients connected to it will use the frequency with
better connection quality. For details, see Separate the 2.4 GHz and 5 GHz Wi-Fi
networks.
If any device that supports 2.4 GHz network only needs to connect to the Wi-Fi
network, do not enable this function.
WiFi Name
Specifies the Wi-Fi network name (SSID) of the corresponding Wi-Fi network.