Tenda MX21 Pro - 5 Frequently Asked Questions (FAQ); 5.1 Troubleshooting Web UI Access Issues

Document version: V1.0
277
Scenario
Connection Type
−
You have a router that can access the IPv6 network.
IPv6 service is included in the PPPoE user name and password.
PPPoEv6
The ISP provides you with a set of information including IPv6 address, subnet mask,
default gateway and DNS server.
Static IPv6 address
Before configuring the IPv6 function, ensure that you are within the coverage of the IPv6 network and
already subscribe to the IPv6 internet service. Contact your ISP for any doubt about it.
DHCPv6
DHCPv6 enables the Mesh device to obtain an IPv6 address from the DHCPv6 server to access the
internet. It is applicable in the following scenarios:
−
The ISP does not provide any PPPoEv6 user name and password and information
about the IPv6 address.
−
You have a router that can access the IPv6 network.
Configuration procedure:
Step 1
Log in to the web UI (mobile client), and navigate to More > IPv6.
Step 2
Enable the IPv6 function.
Step 3
Set Internet Connection Type to DHCPv6.
Step 4
Tap Save.
Smart home gateway