Need help?Do you have a question about the Tenmars TM-102 and is the answer not in the manual?
General| Resolution (μT) | 0.01 μT |
|---|---|
| Power Supply | 9V Battery |
| Repeatability | ±3% |
| Type | Light and Magnetic Field Meter |
| Accuracy (Lux) | ±5% |
| Accuracy (μT) | ±5% |
| Resolution (Lux) | 0.1 Lux |
| Display | 3 1/2 digits LCD |
| Temperature Characteristic | ±0.1% / °C |
| Photo detector | Silicon photodiode |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | Less than 80% RH |
| Frequency Range | 30Hz to 300Hz |
| Sampling Time | 0.4 second |
Conforms to IEC651 Type2 and ANSI S1.4 Type2 standards for sound level meters.
Measures sound levels from 30-130dB (A-weighting) and 35-130dB (C-weighting).
Offers FAST (125ms) and SLOW (1 sec) time weighting options.
Provides a measurement accuracy of ±1.5dB.
Captures and holds the maximum and minimum sound level readings.
Allows the current reading on the LCD display to be locked.
Activates and cycles through Max, Min, and normal readings.
Details on setting the meter and using an acoustic calibrator for calibration.
Describes how the LCD indicates successful calibration completion.
Specifies that the 94dB calibration process can be repeated annually.
Instructions for installing a new battery and identifying when replacement is needed.
Details on choosing FAST/SLOW response and A/C weighting for different measurement needs.
To Next Page
