STX-1 Series Instrument www.tensitron.com pg. 4
2. SPECIFICATIONS
Full Scale Accuracy
For the accuracy of each STX-1 and STXM-1 unit, see the Table in Section 4.
STX-1 series instruments are calibrated specifically to your strapping type(s) and size(s) to ensure the
greatest accuracy possible. When ordering, specify: material, width and thickness of the strap.
STXM-1 series instruments include multiple selections for different strapping. Models STXM-250-1
through STXM-1000-1 include multiple selections for Poly and PET strappings. The Model: STXM-
2000-1 includes selections for both Steel, Poly and PET strappings.
Power Requirements
For Instrument Input: 9 VDC…2.2A
For AC Adapter: 100-240V~50-60Hz 0.48A
Power Supply operates with input voltages from 100 –240V and includes several
interchangeable adapters allowing use with European, U.S., Australian, English and other
plug configurations.
Battery: Rechargeable NiMH, custom proprietary design
Battery Life
Approximately 12 hours depending upon backlighting intensity.
Operating Temperature
32º F to 120 º F.
If these values are exceeded, battery charge/discharge rates will decline. However, this could be
offset by using the power supply. Charging in direct sunlight or near a heat source will not
produce a full charge and may permanently damage battery pack.
Storage Temperature
20º F to 158º F. (Instrument and Charger)
To Next Page
Loading...
Need help?
General
