TENSITRON STX-1 Series - 4 Instrument Options; Standard Instruments - Using Customer Material; Standard Instruments - Using Multiple Materials; Add-On Options

STX-1 Series Instrument www.tensitron.com pg. 6
4. INSTRUMENT OPTIONS
• Standard Instruments – Using Customer Material
STX-1 series instruments are calibrated specifically to your strapping type(s) and size(s)
to ensure the greatest accuracy possible. When ordering, specify: material, width and
thickness of the strap.
Model
Range
(pounds)
Resolution
(pounds)
Full Scale
Accuracy
STX-250-1
5-250
0.5
1%
STX-500-1
25-500
1.0
1%
STX-1000-1
50-1000
5.0
1%
STX-2000-1
100-2000
10.0
2%
• Standard Instruments – Using Multiple Materials
STXM-1 series instruments include multiple selections for different strapping. Models
STXM-250-1 through STXM-1000-1 includes multiple selections for Poly and PET
strappings. The Model: STXM-2000-1 includes selections for both Steel, Poly and PET
strappings.
STXM-250-1
5-250
0.5
3%
STXM-500-1
25-500
1.0
3.5%
STXM-1000-1
50-1000
5.0
4%
STXM-2000-1
100-2000
10.0
4%
• Add-On Options
Instruments can be configured with either of these options:
o - A Analog Output option
Data output at 40 Hz.
0-5 VDC or 4-20 mA with Software-definable ending sequences.
Provided with 10’ strap to interface with your receiving device.
o - E RS-232 Serial Output option
Select data sampling rate from 1, 2 or 5 Hz.
Provided with 10’ strap to interface with your receiving device.