- 11 -- 10 -
1
2
3
4
5
6
7
Electrode recommendations:
The adhesive electrodes that are supplied as a standard accessory with your unit.
These are long lasting and reusable electrodes.
The recommended electrode pads sizes are bigger hand shape pads for large areas, e.g shoulder, waist,
abdomen and leg muscles; small oval pads for smaller areas, such as forearm muscles, joints etc.
Maintenance and care:
Make sure your skin is free from any dirt, oil, or lotions.
Before applying the electrode pads, put a few drops of water on your ngers and rub them on both pads.
This will help the electrodes maintain their adhesiveness.
When you nish using the device, turn it o.
Take o the electrode pads.
Place the protective lms back on the electrode pads or place them on the
pad holder.
Take the wire out from the device and place back in the box until next use.
Store the
TENSMATE unit in a cool, dry place until next use.
Storage conditions:
Technical specifications:
Storage Temperature: -20C to 60C, -4F to 140F
Max. relative humidity: 80%
Atmospheric Pressure: 80KPa to 105KPa
Avoid storing in high temperature, high humidity or direct sunlight.
-20℃-4℉
140℉ 60℃
80%
Dimensions: 93mm x 50mm x 10mm
Net weight: 55g
Power supply: DC 5.0V
Pulse frequency < 100 Hz
Eective voltage< 9V
To Next Page
Loading...