This step is extremely important, so please read carefully.
(2)
Open and close the quick release lever with one hand, while
gradually tightening the adjusting nut clockwise with the
other hand.
(3)
(4)
(5)
Continue tightening the nut until you feel resistance from
the lever when it reaches a parallel position with the hub.
Grip the front fork with your ngers and use the palm of your
hand to apply force to the quick release lever. It should take
considerable force to tighten the lever completely.
Once fully closed, the lever should be at a position shown in
the picture below.
13
To Next Page
Loading...
