The pedals are marked with "R" (Right) and "L" (Left).
This refers to the two sides of the e-bike. The R pedal goes to the side
of the carbon belt, and the L pedal goes to the other side.
Manually install the left pedal by turning counterclockwise. Tighten
the pedal securely with a 15mm wrench.
Manually install the right pedal by turning clockwise. Tighten the
pedal securely with a 15mm wrench.
Install the pedals
(1)
(2)
(3)
10mm
Wrench
15mm
Wrench
Left Right
18
To Next Page
Loading...
