14.
15.
16.
17.
OVERTURNING HAZARD
DEATH OR SERIOUS INJURY
This unit has been tested for stability on a
maximum slope of 5 degrees.
Working on slopes that exceed 5 degrees
may result in truck tipping over.
All tires must remain on the ground.
Position or park truck so indicator is in the
green area.
Set Outriggers (if equipped) so indicator
remains in green area.
May result from overturning machine
458696A
All metal at boom tip is electrically connected.
Operator contact with ANY, live or grounded, line or object
while operator touches CONTROLS or BOOM TIP COMPONENTS
and boom tip contacts any other line or object can result in
Plastic or fiberglass covers offer limited electrical insulation.
Covers are NOT tested, certified, or maintained as insulating.
DO NOT Depend on machine covers for insulation
Comply with OSHA, ANSI, & NESC requirements
Cover all lines with insulated line hose or insulating blankets
Wear Personal Protective Equipment: Fall protection; Eye protection;
Maintain proper CLEARANCE to all lines and objects
Insulating: gloves, sleeves, and hard hat; & Special clothing
ELECTROCUTION HAZARD
DEATH OR SERIOUS INJURY
CONTROLS ARE NOT INSULATED OR ISOLATED
463602A
To Next Page
Loading...
Need help?
General
