RMX SERIES
-XX
483018 - 3/15 Terex South Dakota RMX Series
SAFETY RELATED DECALS
18. 19.
20. 21.
22.
Could Result In
DEATH OR SERIOUS INJURY
operate or maintain this Aerial Device
If YOU sell, install, offer for use, use,
You MUST COMPLY with the requirements of:
FAILURE TO FOLLOW
PROPER PROCEDURES
American National Standards Institute A92.2,
National Electric Safety Code, and OSHA
468476
DATE INITIALS
INSPECTION DATE RECORD
INSPECTION TEST INSPECTION
Follow the Frequent and Periodic Inspection Intervals as required in the Operators
and Maintenance Manuals. Maintain a record of all inspections.
DIELECTRICCRITICAL FASTENER ANNUAL
DATE INITIALS INITIALSDATE
Follow component replacement intervals shown in your Maintenance Manual.
Stamp or engrave below when and who performed inspections.
489119A
X1
495441
full knowledge of affect of changes
Do not alter computer settings without
or contact final stage manufacturer for
See information supplied with truck manuals
Changes to the vehicle computer settings
could affect equipment operation and
could result in crushing or tip over that
could cause Death or Serious Injury.
required settings
495845
CRUSHING HAZARD
To Next Page
Loading...
Need help?
General
