4-124-12
Driving and StoppingDriving and Stopping
Before driving off observe allBefore driving off observe all
instruments and warning lights. Allinstruments and warning lights. All
instruments should operate in theirinstruments should operate in their
normal range and all warning lightsnormal range and all warning lights
should be out except possibly theshould be out except possibly the
Direction Indicator and Headlight MainDirection Indicator and Headlight Main
Beam warning lights.Beam warning lights.
Make sure the area around theMake sure the area around the
machine is clear of personnel andmachine is clear of personnel and
obstructions before driving off.obstructions before driving off.
In the first few minutes of travel, checkIn the first few minutes of travel, check
carefully for the required steering,carefully for the required steering,
braking, engine and transmissionbraking, engine and transmission
power response for maximumpower response for maximum
operating safety.operating safety.
1. Make sure the body is fully down1. Make sure the body is fully down
and body control lever is in theand body control lever is in the
'FLOAT' position.'FLOAT' position.
2. Apply the service brake and release2. Apply the service brake and release
the parking brake.the parking brake.
3. Select the driving direction and the3. Select the driving direction and the
required range.required range.
4. Sound horn; two blasts for forward4. Sound horn; two blasts for forward
and three blasts for reverse.and three blasts for reverse.
14841484
33
052052
273273
11
22 44
314314
N
N
RR
11
RR
22
DD
1
1
22
33
44
55
MODEMODE
To Next Page
Loading...
