4-134-13
5. Release the service brake, apply5. Release the service brake, apply
the accelerator and move off.the accelerator and move off.
6. To stop the machine release the6. To stop the machine release the
accelerator and depress the serviceaccelerator and depress the service
brake pedal. Release the servicebrake pedal. Release the service
brake as the machine slows until,brake as the machine slows until,
when stopped, the pedal is depressedwhen stopped, the pedal is depressed
just enough to hold just enough to hold the machinethe machine
stationary.stationary.
7. When the machine has stopped,7. When the machine has stopped,
shift the transmission to Neutral, applyshift the transmission to Neutral, apply
the parking brake and release thethe parking brake and release the
service brake.service brake.
8. If the service brake does not stop8. If the service brake does not stop
the machine. Apply the parking -the machine. Apply the parking -
emergency brake. This should only beemergency brake. This should only be
applied to stop the machine in anapplied to stop the machine in an
emergency.emergency.
WARNINGWARNING
There is no mechanicalThere is no mechanical
connection between the engineconnection between the engine
and wheels on machines withand wheels on machines with
converter transmissions. Theconverter transmissions. The
parking brake must always beparking brake must always be
applied when the engine isapplied when the engine is
switched off.switched off.
277277
55
77
66
275275
276276
88
11061106
To Next Page
Loading...
