Terra MHD001 - Technical Characteristics; Package Contents

3
REQUIREMENTS FOR EXTERNAL POWER SUPPLY UNIT (PSU) FOR MHD001, MHD002
• Output voltage +12 V ± 1 V
• Output current > 0.3 A
• Ripple at single and/or double mains frequency < 10 mV p-p
• Ripple & noise < 180 mV p-p
• Output connector type 3.5/1.3 (+) plug or 5.5/2.1 mm (+) plug
• Short circuit protection
• Double insulated (marked )
• Meet EN 55022 class B conducted emisions requirements, measuring with grounded load
Caution (mark on rear side).
Risk of electric shock (mark on rear side).
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled
or discarded according to applicable local and national regulations (mark on rear side) .
Equipment intended for indoor usage only (mark on rear side).
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN62368-1 and RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical
equipment“ CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.
PACKAGE CONTENTS
1. Encoder-modulator .......................................................................................... 1 pcs.
2. DC power supply adapter from 5.5/2.1 mm to 3.5/1.3 mm .............................. 1 pcs.
3. Load 75 Ω, type F ...........................................................................................1 pcs.
4. External mains power supply +12 V 1 A max. (for MHD001P, MHD002P) ...... 1 pcs.
5. User manual ...................................................................................................1 pcs.
TECHNICAL CHARACTERISTICS
Type MHD001 MHD001P MHD002 MHD002P
HDMI video input resolution up to 1920x1080x60p
HDMI video output resolution - up to 1920x1080x60p
H.264 encoder video encoding standard MPEG-4 AVC/H.264, Baseline prole 4.0
video output resolution up to 1920x1080x30p
audio encoding standard MPEG-1 Layer II, AAC
Transport stream automatic generation
PAT, SDT, PMTs tables
processing
RF output DVB standard DVB-T
frequency range 174 - 230 MHz, 470-862 MHz
MER, typical 32 dB
modulation QAM64
channel bandwidth 7 MHz/ 8 MHz
shoulder attenuation > 36 dB
level/impedance 90 dBμV/75 Ω
output level adjustment 0 ÷ -30 dB by 1 dB step
loop through frequency range 45-862 MHz
loop through loss ≤ 2.5 dB
Supply voltage 12 ± 1 V - 12 ± 1 V -
Current consumption 300 mA - 330 mA -
Power consumption
-
100-240 V~
-
100-240 V~
50/60 Hz 4 W 50/60 Hz 4.4 W
Operating temperature 0
0
C ÷ +40
0
C
Dimensions/Weight (packed) 133x63x39 mm/0.18 kg (with power supply unit - 0.34 kg)
pr.
pr.
pr.
software control
pr.