Need help?Do you have a question about the TERRY Melody 2 hydraulic MK2 and is the answer not in the manual?
List of major components and their respective weights.
Information regarding COSHH and CDM regulations.
Procedure for fitting a safety scotch device to the lift.
Details on the location and function of the power pack isolate switch.
Fitting the powerpack, control box, and managing cable runs.
Fixing the upper plinth and initial base plate positioning.
Installing the hydraulic ram and assembling the carriage.
Final installation and commissioning steps.
General information and definitions related to the lift's wiring system.
Troubleshooting guide for battery, voltage, and lift over travel issues.
Flow chart detailing the power supply circuit route of the lift.
Procedure for performing insulation resistance tests on safety circuits.
Certificate for documenting the successful installation and testing of the lift.
Checklist for various examinations and tests performed on the lift.
Checklist of service points for regular maintenance inspections.
Guidelines for safe disassembly and disposal of hazardous materials.
Technical drawing and specifications for the 900x1400 platform.
Technical drawing and specifications for the 1100x1400 platform.
Diagram and specifications for the Melody 2 Plinth.
General| Brand | TERRY |
|---|---|
| Model | Melody 2 hydraulic MK2 |
| Category | Lifting Systems |
| Language | English |
To Next Page