250W Grass Trimmer User Guide
10 11
Original Instructions Original Instructions
Care and Maintenance
Taking Care of the Grass Trimmer
• Always disconnect the plug from the power socket before carrying out any
cleaning or maintenance work on the Grass Trimmer.
• Never clean or splash the Grass Trimmer with water.
• Store the Grass Trimmer in a dry, frost free area, out of reach of children.
Carefully remove grass and debris by using a suitable brush or blunt scraping
tool.
• Clean the inside and outside of the protective cover after use and wipe with a
moist sponge.
• If the visible nylon cutting string is shorter than 2.5 cm, adjust and replace the
string.
Adjusting the Nylon Cutting Line
The nylon cutting line can wear or break preventing the Grass Trimmer from cutting.
1. To change the length of the nylon cutting line press and release the Grass Trimmer on the
ground or a solid surface while operating. This will cause the spool to release the line.
2. The Grass Trimmer has a blade that continuously cuts the line down to the appropriate
length.
Replacing the Nylon Line Spool
If the nylon cutting line is broken and the nylon
spool needs replacing:
1. Press the two release clips on the side of
the Line Spool cover and pull to remove, taking
carenottodislodgethespring(g.8).
2.Threadthenew/relledspoolthroughthetwo
eyeholes in the Trimmer Head.
3. Insert the nylon disc so that it sits on the
spring(g.9).
4. Line up the release clips of the spool cover
with the holes on the Trimmer Head and push
so that the spool cover clicks into position.
Maintenance
• Always keep the Grass Trimmer clean.
• Do not use caustic cleaning agents to clean the plastic housing.
• GettheGrassTrimmercheckedbyaqualiedpersonorapprovedservice
agent if an excessive amount of sparks are generated when in use.
• Do not allow water to come into contact with the Grass Trimmer.
g. 8
g. 9
To Next Page
Loading...