250W Grass Trimmer User Guide
8 9
Original Instructions Original Instructions
Tips for Using the Grass Trimmer
• Always be aware of the position of the
power cable when using the Grass Trimmer.
Keep the Power Cable to your back and out
of the way of the cutting path. Take extra
care when changing direction.
Trimming Grass and Weeds
• Sweep the Grass Trimmer left and right.
Keep the cutting head level with the ground
(g.7).
• Cut small patches of grass and weeds. The
Grass Trimmer is not suitable for cutting
large areas.
• Where possible cut with the left-hand side of
the Grass Trimmer so that cuttings, dust and
stones are thrown forwards, away from the
user.
• Ideal working conditions will be achieved
when the Grass Trimmer is tilted at an angle
of 30
0
.
Trimming Lawn Surfaces
• Hold the Grass Trimmer in front of you at an inclined angle of 30
0
with the Cutting Head level
with the ground.
• Guide the Grass Trimmer in a semi circular motion around your starting position.
• For a good cutting performance do not use on grass higher than 15 cm. Cut taller grass
down in gradual stages.
Fig. 7
Cable Restraint
A cable restraint has been included to prevent
a cable snag from damaging the connections to
the Grass Trimmer.
Create a loop in the mains cable, feed it up
through the slot in the restraint and loop over
thehook(g.6).
Operating the Grass Trimmer
1. Ensure that the Grass Trimmer is connected
to the mains power supply. Firmly grip both
handles.
2. Stand upright and hold the Grass Trimmer
in a relaxed position away from your body. Do
not rest the cutting head on the ground. Hold it
above the grass.
3. To turn the Grass Trimmer On press the On/
Off switch while pressing the On/Off Trigger
(g.5).Forcontinuousoperationreleasethe
On/Off button and hold the On/Off trigger.
4. To turn the Grass Trimmer Off release the
On/Off trigger.
g. 6
g. 5
On/Off Trigger
3. Insert the screw provided into the hole on
the Cutting Guard Cover and tighten using a
suitablescrewdriver.(g.4).
g. 4
On/Off Switch
To Next Page
Loading...