5
ENG
BEFORE FIRST USE
The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before
you can use the appliance. Remove all filters, unpack them and place them back into the appliance as
described below.
1. Put the appliance upside down on a soft cloth to avoid scratching, to open the base cover, you need
to find an arrow point
on the base cover corresponding the LOCK position, turn the base cover
counterclockwise from LOCK to OPEN position, then the lock released.
2. Remove the base cover and take out the filter.
3. Remove the packaging material from the filter.
NOTE: Make sure you insert the filters in the correct position.
Placing the filters
To Next Page
Loading...
Need help?
General
