Tesla 3 Series - Operating Environment; Remote Control Battery Replacement

9
ENG
CLICK
7. Put the plug in the wall socket and switch on the appliance again. (g)
8. Reset Filter’s lifetime.
The filter lifetime should be reset if
lights up, after replacing the
new filter, you need to reset filter lifetime.
1. Plug in the air purifier and turn it on.
2. Press and hold
for 3 seconds.
3. Release
and the light will turn off, indicating that the reset is
complete.
3. Remove the old filter. (c)
4. Remove the packaging
material of the new filter. (d)
5. Put the new filter back into
the appliance. (e)
2. Put the appliance upside down on a soft cloth to avoid scratching,
to open the base cover, you need to find an arrow point
on the
base cover corresponding the LOCK position, turn the base cover
counterclockwise from LOCK to OPEN
position, then the lock released. (b)
6. Turn the base cover clockwise from OPEN position to LOCK
position, you will hear a “click” sound, the base cover is fastened. (f)
(g)
(h)
(c)
(d) (e)
(b)
(f)
3seconds