Tesla 3 - Page 35

Rear Outboard Seats
Infants and children can occupy a rear outboard seat using either belt-based or ISOFIX/i-Size
child restraint systems. The rear outboard seats support the use of the following ISOFIX size
classes:
• Size class A, B, and B1 forward-facing.
• Size class C, D and E rear-facing.
Infants and children can also occupy a rear outboard seat using a Type B2 booster seat, either
attached to the lower anchor bars or belted, as described in the instructions provided by the child
restraint system manufacturer.
Note: To accommodate large rear-facing ISOFIX child restraint systems (size class C), you may
need to move the corresponding front seat forward to the mid-track position (up to 13 cm forward
of the rearmost position), raise the seat upward (2 cm from its lowest position), and angle the seat
back to 15 degrees (or 10 degrees rearward from its forward-most position).
Note: The rear outboard seats support the use of upper tether straps (see Attaching Upper Tether
Straps on page 37).
Note: All weight groups are supported.
Seating Children Safely in Model 3
34 Model 3 Owner's Manual