Tesla 3 - Features

Features
These safety features are available on all
Model 3 vehicles:
• Lane Assist (see Lane Assist on page
99).
• Collision Avoidance Assist (see Collision
Avoidance Assist on page 102).
• Speed Assist (see Speed Assist on page
105).
• Auto High Beam (see High Beam
Headlights on page 55).
These Autopilot convenience features are
designed to reduce driver workload:
Note: Depending on options purchased,
software version, and market region, your
vehicle may not be equipped with all
Autopilot convenience features.
• Trac-Aware Cruise Control (see Trac-
Aware Cruise Control on page 82)
• Autosteer (see Autosteer on page 88)
• Auto Lane Change (see Auto Lane
Change on page 90)
• Autopark (see Autopark on page 95)
• Summon (see Summon on page 97)
• Navigate on Autopilot (see Navigate on
Autopilot on page 91)
You can enable/disable these features and in
some cases, control how they work. To access
settings, touch Controls > Autopilot.
Calibration
Model 3 must maneuver with a great deal of
precision when Autopilot features are being
used. Therefore, before some features (for
example, Trac-Aware Cruise Control or
Autosteer) can be used for the first time, some
cameras must complete a self-calibration
process.
Calibration typically completes after driving
32-40 km, but the distance varies depending
on road and environmental conditions. Driving
on a straight road with highly-visible lane lines
allows Model 3 to calibrate quicker. When
calibration is complete, the features are
available for use. Contact Tesla if your Model 3
has not completed the calibration process
after driving 160 km.
Note: If you attempt to use a feature that is
not available until the calibration process is
complete, the feature will not be enabled and
the touchscreen displays a message.
Note:
Model 3 repeats the calibration process
if the cameras are serviced by Tesla and in
some cases, after a software update.
Limitations
Many factors can impact the performance of
Autopilot components, causing them to be
unable to function as intended. These include
(but are not limited to):
• Poor visibility (due to heavy rain, snow,
fog, etc.).
• Bright light (due to oncoming headlights,
direct sunlight, etc.).
• Damage or obstructions caused by mud,
ice, snow, etc.
• Interference or obstruction by object(s)
mounted onto the vehicle (such as a bike
rack).
• Obstruction caused by applying excessive
paint or adhesive products (such as
wraps, stickers, rubber coating, etc.) onto
the vehicle.
• Narrow or winding roads.
• A damaged or misaligned bumper.
• Interference from other equipment that
generates ultrasonic waves.
• Extremely hot or cold temperatures.
Warning: The list above does not
represent an exhaustive list of situations
that may interfere with proper operation
of Autopilot components. Never depend
on these components to keep you safe. It
is the driver's responsibility to stay alert,
drive safely, and be in control of the
vehicle at all times.
Caution: If a windshield replacement is
needed, take your vehicle to Tesla
Service. This will ensure appropriate
handling and mounting of the camera(s).
Failure to do so can cause one or more
Autopilot features to malfunction.
Cleaning Cameras and Sensors
To ensure the various Autopilot components
can provide information that is as accurate as
possible, keep them clean and free of
obstructions or damage. Occasionally remove
any buildup of dirt by wiping the components
with a soft cloth dampened with warm water.
Caution:
Do not use chemical-based or
abrasive cleaners. Doing so can damage
surfaces.
About Autopilot
80 Model 3 Owner's Manual