Tesla MODEL X - Page 143

Air inside Model X is recirculated. This prevents outside air (trac fumes) from
entering, but reduces dehumidifying performance. Recirculating the air is the most
ecient way to cool the front cabin area. To prevent the windshield from fogging in
some conditions, briefly change the setting every hour to draw in outside air.
6. If your Model X is equipped with the medical-grade
HEPA (High Eciency Particulate Air) filter, this filter
ensures the best quality air inside the cabin whenever
the climate control system is on and outside air is
entering the cabin (recirculate is
o). The HEPA filter
is extremely eective at removing particles, including
pollution, allergens, bacteria, pollen, mold spores, and
viruses. Both the HEPA filter and the secondary
filtration system also contain activated carbon to
remove a broad spectrum of odors and gases. When
you engage Bioweapon Defense Mode, the positive
pressure inside the cabin minimizes the amount of
outside air that can enter the vehicle.
NOTE: Some gases, such as carbon monoxide, are
not
eectively removed by activated carbon.
7. When Model X is in Park, touch SCHEDULE to set a
recurring daily time when you want Model X to be
ready to drive by charging during
o-peak hours and
preconditioning the Battery and cabin climate (see
Scheduled Charging and Scheduled Departure on
page 175).
8.
Touch AUTO to change all settings on the currently
displayed tab back to their default values. The icon is
blue whenever the climate control system is set to
AUTO.
NOTE: Because Model X runs much quieter than a
gasoline-powered vehicle, you may notice the sound of
the A/C compressor as it is operating. To minimize noise,
reduce the fan speed.
Rear Cabin Climate Controls (6 and 7 seat
vehicles only)
1.
Touch the power button to turn the rear climate
controls on or o.
2. Touch AUTO to change all settings back to their
default values.
NOTE: To save energy when set to AUTO, the rear
heating and air conditioning turn
o when Model X
detects that there are no occupants in the second or
third row seats. To override this energy saving feature
and save the settings until you manually change
them, touch the
AUTO button a second time.
3.
Touch + or - to set the speed of the fan.
Climate Controls
141Using the Touchscreen