If the outlet is worn, it should be replaced with a high-
quality outlet. Consider upgrading to a Tesla Wall
Connector for greater convenience and highest
charging speed.
(UMC_w017)
Charge rate reduced - Wall plug
temperature high
Wall outlet and wiring inspection
recommended
High temperature detected by Mobile Connector alerts
indicate the outlet used to charge is becoming too
warm, so charging has been slowed to protect the
outlet.
This is not typically an issue with your vehicle or your
Mobile Connector, but rather an issue with the outlet. A
warm outlet may be caused by a plug that is not fully
inserted, a loose building wiring connection to the
outlet, or an outlet that is beginning to wear out.
To regain normal charge speed, make sure your adapter
is fully plugged into the outlet. If charging speed does
not return to normal, contact an electrician to inspect
the outlet and building wiring connections to the outlet
and complete any repairs needed.
If the outlet is worn, it should be replaced with a high-
quality outlet. Consider upgrading to a Tesla Wall
Connector for greater convenience and highest
charging speed.
Troubleshooting Alerts
266 MODEL X Owner's Manual
To Next Page
Loading...
