NOTE: To accommodate large rear-facing LATCH child
safety seats, you may need to move the seat in the full
rearward position, and move the corresponding front
seat forward to the mid-track position (up to 13 cm
forward of the rearmost position), raise the seat upward
(3 cm from its lowest position), and angle the seat back
to 15 degrees (or 10 degrees rearward from its forward-
most position).
WARNING:
For vehicles with third row seats,
when a child is seated in a second row monopost
seat, the setting for the button that moves a
second row outboard seat forward for easy
access into the third row should be OFF (touch
Controls > Seats > Easy Entry). This ensures that
you need to manually hold the button to move the
seat, preventing a child seated in the second row
from being pushed against the corresponding
front seat. See #unique_124 on page
#unique_125 on page .
To install a LATCH child safety seat, slide the safety seat
latches onto the anchor bars until they click into place.
Carefully read and follow the instructions provided by
the child safety seat manufacturer.
BENCH SEATS:
MONOPOST SEATS:
Child Safety Seats
36 MODEL X Owner's Manual
To Next Page
Loading...
