For single-strap tethers, position the strap in the
outboard seating positions over the outside-facing side
of the head restraint (the same side of the head
restraint as the seat belt retraction mechanism). In the
center seating position (if equipped), center and
position the strap over the top of the head restraint.
Single Strap - Second Row Monopost Seats:
Single Strap - Second Row Bench Seats:
Single Strap - Third Row Seats
Testing a Child Safety Seat
Before seating a child, always make sure the child
safety seat is not loose:
1. Hold the child safety seat by the belt path and try to
slide the safety seat from side to side and front to
back.
2. If the seat moves more than one inch (2.5 cm), it is
too loose. Tighten the belt or reconnect the LATCH
retained child safety seat.
3.
If you are unable to reduce slack, try a dierent seat
location or try another child safety seat.
Child Safety Seats
38 MODEL X Owner's Manual
To Next Page
Loading...
