Tesla WF71460T - Control Panel

8
ENG
The following illustration is a simple example of the model control panel. The illustration is for reference only.
Please refer to the actual product.
Control panel
1
2
3 4 5 6 7
1. Cycle Selector Turn the dial to select a cycle.
2. Display
The display shows current cycle information and estimated time remaining, or an
information code when a problem occurs.
3. Temp.
Press to change the water temperature for the current cycle
Available temperature range depends on the cycle.
The selected temperature will be displayed on the display.
4. Speed
Press to change the spinning speed for the current cycle.
Available spin speed depends on the cycle.
The selected spin speed will be displayed on the display.
5. Delay
Press Delay repeatedly to cycle through the available Delay options (from 3 to 24
hours in one hour increments).
6. Start/Pause
Press to StarUPause operation.
Press the button once to start a cycle.
To pause operation, press the button again.
You may change the cycle settings and options.
To resume paused operation, press the button again.
7. On/Off
Press to turn On/Off the washing machine.
If you turn on the washing machine and do not use it for 10 minutes, it will turn off
automatically.
Delay
You can set the washing machine to finish yo urwash automatically at a later time, choosing a delay of
between 3 to 24 hours (in 1 hour increments). The hour dis played indicated the time the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay repeatedly until a desired end time is set.
3. Press
Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay, restart the washing machine by pressing
On/Off.
Real-life case
You want to finish a two-hour course 3 hours later from now. For this, you add the Delay option to the current
cycle with the 3-hour setting, and press
Start/Pause at 2:00 p.m. Then, what happens? The washing
machine starts operating at 3:00 p.m., and ends at 5:00 p.m.
Steam Wash Icon
If this icon is always bright, it means the Steam Wash function is ena bled.
Due to the different configuration of models, some models do not have this configuration, please refer to the
actual model.